Oh! Again another piece of caution.
DO NOT TRUST ANY FIGURE IN THE DATA SHEETS BUT FOR OPERATIING CURRENT AND MAXIMUM TEMPERATURE.
All the voltages are derived from experiments @ operating current. OPERATING CURRENT IS THE ONLY THING TO GO BY.
So, don't ever set your PSU to 3,6V (or any given figure in the data sheet) expecting some potent results. It will not work!
Put an Amp-meter in series with your montage and raise the voltage slowly, monitoring everything as you go. This is the way to go.
And diodes, including LEDs cannot, i mean CANNOT, be put in paralelle. NEVER without a proper polarizing resistor for each diode or string of diodes.
So long...
DO NOT TRUST ANY FIGURE IN THE DATA SHEETS BUT FOR OPERATIING CURRENT AND MAXIMUM TEMPERATURE.
All the voltages are derived from experiments @ operating current. OPERATING CURRENT IS THE ONLY THING TO GO BY.
So, don't ever set your PSU to 3,6V (or any given figure in the data sheet) expecting some potent results. It will not work!
Put an Amp-meter in series with your montage and raise the voltage slowly, monitoring everything as you go. This is the way to go.
And diodes, including LEDs cannot, i mean CANNOT, be put in paralelle. NEVER without a proper polarizing resistor for each diode or string of diodes.
So long...
Comment